Engine service kit containing quality Bosch filters
Vehicle Fitment Guide
Model Details
Make:
SkodaModel:
Octavia 2.0 TDiManufacture date:
02/2010-12/2013Model code:
1ZEngine Details
Type:
Turbocharged DieselEngine codes:
CFHC / CFHF / CLCA / CLCBCylinders:
4Capacity(cc):
1968Valves:
16Power:
81kW (110HP) / 103kW (140HP)Vehicle Identification
VIN code:
1Z (from digit 7 of VIN)
VIN example: TMBKE2
1Z4C2000000
(
1Z WHERE SHOWN IN VIN ONLY IDENTIFIES
SKODA OCTAVIA (1Z) MODEL,
NOT IF THIS ITEM WILL BE CORRECT - PLEASE READ IMPORTANT INFORMATION BELOW)
IMPORTANT INFORMATION - PLEASE READ BEFORE ORDERING
- *** IMPORTANT! - THERE IS A CHOICE OF OIL FILTER AND FUEL FILTER ON THIS VEHICLE! ***
*** THIS ITEM IS ONLY SUITABLE FOR RIGHT HAND DRIVE SKODA OCTAVIA MK2 2.0 TDI MODELS WITH ENGINE CODES: CFHC / CFHF / CLCA / CLCB ***
*** IMPORTANT! NOT SUITABLE FOR ENGINE CODES: AZV / BJB / BKD / BLS / BMM / BMN / BXE / CEGA WHICH USE A DIFFERENT OIL FILTER *** - *** ONLY SUITABLE FOR SKODA OCTAVIA MK2 (1Z) MODELS, NOT FOR ANY MK1 (1U) MODELS OR ANY MK3 (5E) MODELS ***
*** NOT SUITABLE FOR LEFT HAND DRIVE VEHICLES WHICH REQUIRE A DIFFERENT CABIN FILTER*** - IF YOU ARE NOT SURE IF THIS ITEM WILL BE CORRECT FOR YOUR VEHICLE, PLEASE CONTACT US BEFORE PURCHASING WITH YOUR VEHICLE'S FULL REGISTRATION NUMBER (OR MAKE, MODEL, FULL VIN AND ENGINE CODE FOR NON-UK VEHICLES)
Item Contents
- Bosch oil filter x 1
- Bosch charcoal cabin/pollen filter x 1
- Oil sump drain plug with seal x 1
Please note:- IMPORTANT! The oil filter supplied may look like either shown in the image below. We are currently receiving both designs from Bosch so either could be supplied.
Bosch oil filter
Bosch cabin filter
Sump plug
(The images contain pictures of the parts that will normally be supplied in this service kit, which were taken at the time of listing. Manufacturers occasionally alter the design of their parts, so the parts supplied may look slightly different to the parts shown.)
Manufacturer's Warranty Not Affected
The parts in this service kit are of at least the same quality as the original manufacturer's parts. Thanks to new EU regulations, even if your vehicle is still under the Manufacturer's Warranty, correct fitment of these parts will
NOT invalidate the warranty.
Block Exemption Regulation (EC) 1400/2002 has been introduced to ensure more competition in the servicing and repairs market, leading to lower costs and higher standards for consumers.
The Block Exemption Regulation means that you have the freedom to choose where to have your vehicle maintained, without the manufacturer's warranty being invalidated, providing original parts, or parts of matching quality are fitted by the garage / repairer.
We strongly recommend that all parts we supply are fitted by someone qualified to do so. Incorrect fitment of vehicle parts can cause serious damage and/or injury.
