Engine service kit containing quality Bosch filters
Vehicle Fitment Guide
Model Details
Make:
PeugeotModel:
Partner 1.6 HDiManufacture date:
07/2005-08/2014Engine Details
Type:
Turbocharged DieselEngine codes:
DV6ATED4 / DV6AUTED4 / DV6B / DV6BTED4 / DV6TED4 / DV6TED4BUCylinders:
4Capacity(cc):
1560Valves:
16Power:
55kW (75HP) / 66kW (90HP) / 80kW (109HP)Vehicle Identification
VIN code:
5B/7A/7B/7C/7J/7F/GB/GJ + 9HS/9HT/9HV/9HW/9HX/9HZ (from digit 4 of VIN)
VIN example: VF3
7F9HXCAJ600000
(
5B/7A/7B/7C/7J/7F/GB/GJ + 9HS/9HT/9HV/9HW/9HX/9HZ WHERE SHOWN IDENTIFIES
PEUGEOT PARTNER WITH
DV6ATED4 / DV6AUTED4 / DV6B / DV6BTED4 / DV6TED4 / DV6TED4BU 1.6 HDI ENGINE)
IMPORTANT INFORMATION - PLEASE READ BEFORE ORDERING
- *** VERY IMPORTANT! THERE ARE FILTER CHOICES ON THIS VEHICLE. PLEASE CHECK THE ENGINE CODE BEFORE ORDERING. ***
*** ONLY SUITABLE FOR 1ST AND 2ND GENERATION PEUGEOT PARTNER 1.6 HDI MODELS WITH ENGINE CODES: DV6ATED4 / DV6AUTED4 / DV6B / DV6BTED4 / DV6TED4 / DV6TED4BU ***
*** NOT SUITABLE FOR ENGINE CODES: DV6C / DV6CTED / DV6D / DV6DTED / DV6ETED / DV6ETEDM / DV6FC / DV6FD / DV6FE WHICH REQUIRE DIFFERENT FILTERS *** - *** THERE IS A FUEL HEATER FITTED TO THE FUEL FILTER ON THIS VEHICLE. THE FUEL HEATER IS NOT SUPPLIED AND MUST BE REMOVED FROM THE OLD FILTER AND USED WITH THE NEW ONE SUPPLIED IN THIS SERVICE KIT ***
- IF YOU ARE NOT SURE, PLEASE CONTACT US BEFORE BUYING (BY CLICKING 'Contact seller' NEAR THE TOP OF THIS PAGE) WITH YOUR VEHICLE'S FULL REGISTRATION NUMBER (OR VIN FOR NON-UK VEHICLES)
Item Contents
- Bosch oil filter x 1
- Bosch fuel filter x 1
- Seal for oil sump drain plug x 1
Bosch oil filter
Bosch fuel filter
Sump plug seal
(The images contain pictures of the parts that will normally be supplied in this service kit, which were taken at the time of listing. Manufacturers occasionally alter the design of their parts, so the parts supplied may look slightly different to the parts shown.)
Manufacturer's Warranty Not Affected
The parts in this service kit are of at least the same quality as the original manufacturer's parts. Thanks to new EU regulations, even if your vehicle is still under the Manufacturer's Warranty, correct fitment of these parts will
NOT invalidate the warranty.
Block Exemption Regulation (EC) 1400/2002 has been introduced to ensure more competition in the servicing and repairs market, leading to lower costs and higher standards for consumers.
The Block Exemption Regulation means that you have the freedom to choose where to have your vehicle maintained, without the manufacturer's warranty being invalidated, providing original parts, or parts of matching quality are fitted by the garage / repairer.
We strongly recommend that all parts we supply are fitted by someone qualified to do so. Incorrect fitment of vehicle parts can cause serious damage and/or injury.
