Engine service kit containing quality Bosch filters
Vehicle Fitment Guide
Model Details
Make:
PeugeotModel:
Boxer 2.2 HDiManufacture date:
10/2013-01/2020Engine Details
Type:
Turbocharged DieselEngine codes:
P22DTE / 4HG / 4HH / 4HJ / 4HU / 4HVCylinders:
4Capacity(cc):
2198Valves:
16Power:
74kW (101HP) / 81kW (110HP) / 88kW (120HP) / 96kW (130HP) / 110kW (150HP)Vehicle Identification
VIN code:
VF3Y + A/C + 4H + G/H/J/U/V (from digit 6 of VIN)
VIN example: VF3YC
TMFC12000000
(
VF3Y + A/C + 4H + G/H/J/U/V WHERE SHOWN IDENTIFIES
PEUGEOT BOXER WITH
P22DTE / 4HG / 4HH / 4HJ / 4HU / 4HV 2.2 HDI ENGINE,
NOT IF THIS ITEM WILL BE CORRECT, PLEASE READ IMPORTANT INFORMATION BELOW)
IMPORTANT INFORMATION - PLEASE READ BEFORE ORDERING
- *** VERY IMPORTANT! THERE IS A CHOICE OF OIL FILTER ON THIS VEHICLE DEPENDING ON THE ENGINE AND MANUFACTURE DATE! ***
*** ONLY SUITABLE FOR 3RD GENERATION PEUGEOT BOXER 2.2 HDI 110 / 130 / 150 MODELS MANUFACTURED FROM 10/2013-> ONWARDS (WITH SPIN-ON OIL FILTER) ***
*** NOT SUITABLE FOR VEHICLES MANUFACTURED UP TO ->09/2013 (WITH DROP-IN ELEMENT OIL FILTER) *** - IF YOU ARE NOT SURE IF THIS ITEM WILL BE CORRECT FOR YOUR VEHICLE, PLEASE CONTACT US BEFORE PURCHASING WITH YOUR VEHICLE'S FULL REGISTRATION NUMBER (OR FULL VIN FOR NON-UK VEHICLES)
Item Contents
- Bosch oil filter x 1
- Bosch air filter x 1
- Bosch fuel filter x 1
- Bosch cabin/pollen filter x 1
- Seal for oil sump drain plug x 1
Bosch oil filter
Bosch air filter
Bosch fuel filter
Bosch cabin filter
Sump plug seal
(The images contain pictures of the parts that will normally be supplied in this service kit, which were taken at the time of listing. Manufacturers occasionally alter the design of their parts, so the parts supplied may look slightly different to the parts shown.)
Manufacturer's Warranty Not Affected
The parts in this service kit are of at least the same quality as the original manufacturer's parts. Thanks to new EU regulations, even if your vehicle is still under the Manufacturer's Warranty, correct fitment of these parts will
NOT invalidate the warranty.
Block Exemption Regulation (EC) 1400/2002 has been introduced to ensure more competition in the servicing and repairs market, leading to lower costs and higher standards for consumers.
The Block Exemption Regulation means that you have the freedom to choose where to have your vehicle maintained, without the manufacturer's warranty being invalidated, providing original parts, or parts of matching quality are fitted by the garage / repairer.
We strongly recommend that all parts we supply are fitted by someone qualified to do so. Incorrect fitment of vehicle parts can cause serious damage and/or injury.
