High quality OE specification ALCO Filter service kit
Vehicle Fitment Guide
Model Details
Make:
PeugeotModel:
Boxer 2.2 HDIManufacture date:
04/2006-09/2013Engine Details
Type:
Turbocharged DieselEngine codes:
4HG (P22DTE) / 4HH (P22DTE) / 4HJ (P22DTE) / 4HU (P22DTE) / 4HV (P22DTE)Cylinders:
4Capacity:
2198Valves:
16Power:
74kW (101HP) / 81kW (110HP) / 88kW (120HP) / 96kW (130HP) / 110kW (150HP)IMPORTANT INFORMATION - PLEASE READ BEFORE ORDERING
- *** VERY IMPORTANT! THERE IS A CHOICE OF OIL FILTER FOR THIS VEHICLE DEPENDING ON THE MANUFACTURE DATE! PLEASE READ THE FOLLOWING CAREFULLY BEFORE ORDERING! ***
*** ONLY SUITABLE FOR 3RD GENERATION PEUGEOT BOXER (2006>>) 2.2 HDI MODELS (WITH 2198cc PUMA / P22DTE ENGINE) MANUFACTURED UP TO >>09/2013 (WITH DROP-IN ELEMENT TYPE OIL FILTER) ***
*** NOT SUITABLE FOR VEHICLES MANUFACTURED FROM 10/2013>> ONWARDS (WITH SPIN-ON OIL FILTER) WHICH WILL REQUIRE A DIFFERENT OIL FILTER ***
*** NOT SUITABLE FOR 2.0 BLUEHDI, 2.2 BLUEHDI, 3.0 HDI OR ANY OTHER MODELS - WHICH HAVE DIFFERENT FILTERS FITTED ***
- IF YOU ARE NOT SURE IF THIS ITEM WILL BE CORRECT FOR YOUR VEHICLE, PLEASE CONTACT US BEFORE PURCHASING (BY CLICKING 'Contact seller' NEAR THE TOP OF THIS PAGE) WITH YOUR VEHICLE'S FULL REGISTRATION NUMBER (OR FULL VIN FOR NON-UK VEHICLES)
Item Contents
- ALCO oil filter x 1
- ALCO air filter x 1
- ALCO fuel filter x 1
- ALCO cabin/pollen filter x 1
- Oil sump drain plug with seal x 1
The item image contains a picture of the parts that will be supplied in this service kit, which was taken at the time of listing. ALCO occasionally alters the design of their filters, so the filters supplied may look slightly different to the filters shown.
Oil filter
Air filter
Fuel filter
Cabin filter
Sump plug
Manufacturer's Warranty Not Affected
The parts in this service kit are of at least the same quality as the original manufacturer's parts. Thanks to new EU regulations, even if your vehicle is still under the Manufacturer's Warranty, correct fitment of these parts will
NOT invalidate the warranty.
Block Exemption Regulation (EC) 1400/2002 has been introduced to ensure more competition in the servicing and repairs market, leading to lower costs and higher standards for consumers.
The Block Exemption Regulation means that you have the freedom to choose where to have your vehicle maintained, without the manufacturer's warranty being invalidated, providing original parts, or parts of matching quality are fitted by the garage / repairer.
All ALCO filters sold by us comply with MV-BER N° 461/2010 (Motor Vehicle Block Exception Regulation) and are manufactured within the EU in conformance with the requirements of ISO 9001 - 2008.
We strongly recommend that all parts we supply are fitted by someone qualified to do so. Incorrect fitment of vehicle parts can cause serious damage.
