Engine service kit containing quality Bosch filters
Vehicle Fitment Guide
Model Details
Make:
PeugeotModel:
Boxer 2.0 BlueHDI / 2.2 BlueHDIManufacture date:
07/2015-06/2023Model code:
3rd generation / Mk3Engine Details
Type:
Turbocharged DieselEngine codes:
4HB (DW12RUD) / 4HH (DW12RUC) / 4HK (DW12RUE) / AHM (DW10FUE) / AHN (DW10FUD) / AHP (DW10FUC)Cylinders:
4Capacity(cc):
1997 / 2179Valves:
16Power:
81kW (110HP) / 88kW (120HP) / 96kW (130HP) / 103kW (140HP) / 118kW (160HP) / 120kW (163HP) / 121kW (165HP)Vehicle Identification
VIN code:
VF3Y (from digit 1 of VIN)
VIN example:
VF3YC3MAU12H00000
(
VF3Y WHERE SHOWN IN VIN ONLY IDENTIFIES
PEUGEOT BOXER (3RD GENERATION / MK3) MODEL,
NOT THE ENGINE FITTED OR IF THIS ITEM WILL BE CORRECT - PLEASE READ IMPORTANT INFORMATION BELOW)
IMPORTANT INFORMATION - PLEASE READ BEFORE ORDERING
- *** VERY IMPORTANT! THERE IS A CHOICE OF OIL FILTER FOR THIS VEHICLE DEPENDING ON THE ENGINE CODE! PLEASE READ THE FOLLOWING CAREFULLY BEFORE ORDERING! ***
*** ONLY SUITABLE FOR 3RD GENERATION CITROEN RELAY 2.0 / 2.2 BLUEHDI DIESEL MODELS WITH ENGINE CODES: 4HB (DW12RUD) / 4HH (DW12RUC) / 4HK (DW12RUE) / AHM (DW10FUE) / AHN (DW10FUD) / AHP (DW10FUC) ***
*** NOT SUITABLE FOR 2.2 HDI (ENGINE CODES: 4HG (P22DTE) / 4HH (P22DTE) / 4HJ (P22DTE) / 4HU (P22DTE) / 4HV (P22DTE)) OR 3.0 HDI MODELS OR ANY OTHER MODELS - WHICH WILL REQUIRE A DIFFERENT OIL FILTER ***
*** AFTERMARKET BRANDS LIST THE COPPER SUMP PLUG SEAL FOR THIS VEHICLE. THE MAIN DEALER USED TO LIST THE COPPER WASHER, BUT NOW LIST THE BONDED SEAL SUMP PLUG SEAL. WE HAVE INCLUDED BOTH SEALS SO THE FITTER CAN CHOOSE WHICH ONE TO USE (EITHER BY MATCHING THE SEAL REMOVED OR BY THEIR PREFERENCE). ***
- IF YOU ARE NOT SURE IF THIS ITEM WILL BE CORRECT FOR YOUR VEHICLE, PLEASE CONTACT US BEFORE PURCHASING WITH YOUR VEHICLE'S FULL REGISTRATION NUMBER (OR FULL VIN FOR NON-UK VEHICLES)
Item Contents
- Bosch oil filter x 1
- Bosch cabin/pollen filter x 1
- Seal for oil sump drain plug x 2
Bosch oil filter
Bosch cabin filter
Sump plug seal
(The images contain pictures of the parts that will normally be supplied in this service kit, which were taken at the time of listing. Manufacturers occasionally alter the design of their parts, so the parts supplied may look slightly different to the parts shown.)
Manufacturer's Warranty Not Affected
The parts in this service kit are of at least the same quality as the original manufacturer's parts. Thanks to new EU regulations, even if your vehicle is still under the Manufacturer's Warranty, correct fitment of these parts will
NOT invalidate the warranty.
Block Exemption Regulation (EC) 1400/2002 has been introduced to ensure more competition in the servicing and repairs market, leading to lower costs and higher standards for consumers.
The Block Exemption Regulation means that you have the freedom to choose where to have your vehicle maintained, without the manufacturer's warranty being invalidated, providing original parts, or parts of matching quality are fitted by the garage / repairer.
We strongly recommend that all parts we supply are fitted by someone qualified to do so. Incorrect fitment of vehicle parts can cause serious damage and/or injury.
