Engine service kit containing quality Bosch filters
Vehicle Fitment Guide
Model Details
Make:
PeugeotModel:
407 1.6 HDiManufacture date:
04/2008-12/2010Engine Details
Type:
Turbocharged DieselEngine code:
DV6TED4Cylinders:
4Capacity(cc):
1560Valves:
16Power:
80kW (109HP)Vehicle Identification
VIN code:
VF36 + C/D/E/J + 9HZ (from digit 1 of VIN)
VIN example:
VF36D9HZH20000000
(
VF36 + C/D/E/J + 9HZ WHERE SHOWN ONLY IDENTIFIES
PEUGEOT 407 WITH
DV6TED4 1.6 HDI ENGINE,
NOT IF THIS ITEM WILL BE CORRECT, PLEASE READ IMPORTANT INFORMATION BELOW)
IMPORTANT INFORMATION - PLEASE READ BEFORE ORDERING
- *** VERY IMPORTANT! THERE IS A CHOICE OF CABIN/POLLEN FILTER DEPENDING ON THE MANFACTURE DATE! PLEASE READ THE FOLLOWING CAREFULLY BEFORE ORDERING! ***
*** ONLY SUITABLE FOR PEUGEOT 407 1.6 HDI MODELS MANUFACTURED FROM 04/2008-> (WITH ORG. NO. FROM 11438-> ONWARDS - OLDER MODELS HAVE A DIFFERENT CABIN FILTER FITTED) ***
*** THERE IS A FUEL HEATER FITTED TO THE FUEL FILTER ON THIS VEHICLE. THE FUEL HEATER IS NOT SUPPLIED AND MUST BE REMOVED FROM THE OLD FILTER AND USED WITH THE NEW ONE SUPPLIED IN THIS SERVICE KIT ***
- IF YOU ARE NOT SURE IF THIS ITEM WILL BE CORRECT FOR YOUR VEHICLE, PLEASE CONTACT US BEFORE PURCHASING WITH YOUR VEHICLE'S FULL REGISTRATION NUMBER (OR VIN FOR NON-UK VEHICLES)
Item Contents
- Bosch oil filter x 1
- Bosch air filter x 1
- Bosch fuel filter x 1
- Bosch charcoal cabin/pollen filter x 1
- Seal for oil sump drain plug x 1
Bosch oil filter
Bosch air filter
Bosch fuel filter
Bosch cabin filter
Sump plug seal
(The images contain pictures of the parts that will normally be supplied in this service kit, which were taken at the time of listing. Manufacturers occasionally alter the design of their parts, so the parts supplied may look slightly different to the parts shown.)
Manufacturer's Warranty Not Affected
The parts in this service kit are of at least the same quality as the original manufacturer's parts. Thanks to new EU regulations, even if your vehicle is still under the Manufacturer's Warranty, correct fitment of these parts will
NOT invalidate the warranty.
Block Exemption Regulation (EC) 1400/2002 has been introduced to ensure more competition in the servicing and repairs market, leading to lower costs and higher standards for consumers.
The Block Exemption Regulation means that you have the freedom to choose where to have your vehicle maintained, without the manufacturer's warranty being invalidated, providing original parts, or parts of matching quality are fitted by the garage / repairer.
We strongly recommend that all parts we supply are fitted by someone qualified to do so. Incorrect fitment of vehicle parts can cause serious damage and/or injury.
