Engine service kit containing quality Bosch filters & Millers engine oil
Vehicle Fitment Guide
Model Details
Make:
FordModel:
S-Max 2.0 TDCiManufacture date:
03/2010-12/2014Model code:
CD340Engine Details
Type:
Turbocharged DieselEngine codes:
TXWA / TYWA / UFWA / UKWACylinders:
4Capacity(cc):
1997Valves:
16Power:
85kW (115HP) / 96kW (130HP) / 100kW (136HP) / 103kW (140HP) / 120kW (163HP)Vehicle Identification
VIN code:
WF0SXXGBWS (from digit 1 of VIN)
VIN example:
WF0SXXGBWS6A00000
(
WF0SXXGBWS WHERE SHOWN IN VIN ONLY IDENTIFIES
FORD S-MAX (CD340) MODEL,
NOT THE ENGINE FITTED OR IF THIS ITEM WILL BE CORRECT - PLEASE READ IMPORTANT INFORMATION BELOW)
IMPORTANT INFORMATION - PLEASE READ BEFORE ORDERING
- *** VERY IMPORTANT! THERE IS A CHOICE OF FUEL FILTER FOR THIS VEHICLE! PLEASE READ THE FOLLOWING CAREFULLY BEFORE ORDERING! ***
*** ONLY SUITABLE FOR 1ST GENERATION FORD S-MAX 2.0 TDCI MODELS WITH ENGINE CODES: TXWA / TYWA / UFWA / UKWA AND MANUFACTURED FROM 03/2010-> ONWARDS (WITH 73.5MM HIGH FUEL FILTER) ***
*** NOT SUITABLE FOR 2.0 TDCI MODELS WITH ENGINE CODES: AZWA / AZWC / QXWA / QXWB / QXWC / KLWA OR ANY OTHER ENGINE CODES (WHICH REQUIRE A DIFFERENT FUEL FILTER) ***
*** NOT SUITABLE FOR VEHICLES MANUFACTURED UP TO ->02/2010 (WITH 76MM HIGH FUEL FILTER) WHICH REQUIRE A DIFFERENT FUEL FILTER ***
*** THE FUEL FILTER INFORMATION ABOVE IS SOURCED FROM A MIXTURE OF FORD DEALER INFORMATION AND AFTERMARKET FILTER CATALOGUES. HOWEVER, WE RECOMMEND CONTACTING US BEFORE PURCHASING IF YOUR VEHICLE WAS REGISTERED DURING 2010, 2011 or 2012 ***
- IF YOU ARE NOT SURE IF THIS ITEM WILL BE CORRECT FOR YOUR VEHICLE, PLEASE CONTACT US BEFORE PURCHASING WITH YOUR VEHICLE'S FULL REGISTRATION NUMBER (OR VIN FOR NON-UK VEHICLES)
Item Contents
- Bosch oil filter x 1
- Bosch fuel filter x 1
- Bosch cabin/pollen filter x 1
- Seal for oil sump drain plug x 1
- Millers Oils Trident Professional ECO 5w30 engine oil x 6 litres (5.65L capacity listed by Millers for this vehicle)
Bosch oil filter
Bosch fuel filter
Bosch cabin filter
Sump plug seal
Millers Oils engine oil
(The images contain pictures of the parts that will normally be supplied in this service kit, which were taken at the time of listing. Manufacturers occasionally alter the design of their parts, so the parts supplied may look slightly different to the parts shown.)
We Supply the Correct Oil
Trident Professional ECO 5w30 Engine OilDescriptionA professional, fully synthetic, full SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. Millers Oils Trident Professional 5W-30 ECO is recommended for engines requiring a 5w30 viscosity targeting Ford, Jaguar Land Rover and Asian manufacturers.
ApplicationMillers Oils Trident Professional 5W-30 ECO is recommended for engines requiring a 5w30 viscosity targeting Ford, Jaguar Land Rover and Asian manufacturers.
| Performance Profile | | Suitable for:- ACEA A1/B1
- Chrysler MS-6395
- Dacia
- Ford WSS-M2C913-D, Ford WSS-M2C913-C, Ford WSS-M2C913-B
- ILSAC GF-4
- Jaguar Land Rover STJLR.03.5003
- Renault RN0700
- Asian manufacturers
|
Features & Benefits- Excellent low temperature flow when cold starting, helping to instantly protect vital components.
- Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components.
- Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability.
- Millers Oils stop start technology delivers instant protection under hot or cold conditions.
(Specifications correct at time of item listing / latest revision. Although we do our best to display the most up to date information and images, these specifications may be subject to change without notice. Millers Oils may change the design of their bottles and/or labels - if they do, the bottle supplied might look different to the bottle shown in the image above, but the product will be the same.)
Quality Parts
Bosch filters are made to meet or exceed vehicle manufacturer specifications and are 100% BER compliant, so you can be confident they meet the high standards required for today's cars.
We strongly recommend that all parts we supply are fitted by someone qualified to do so. Incorrect fitment of vehicle parts can cause serious damage.
