High quality OE specification ALCO Filter service kit with Millers engine oil
Vehicle Fitment Guide
Model Details
Make:
FordModel:
Kuga 2.0 TDCiManufacture date:
03/2008-04/2010Model code:
C394Engine Details
Type:
Turbocharged DieselEngine code:
G6DGCylinders:
4Capacity:
1997Valves:
16Power:
100kW (136HP)Vehicle Identification
VIN code:
WF0RXXGCDR (from digit 1 of VIN)
VIN example:
WF0RXXGCDR8C00000
(
WF0RXXGCDR WHERE SHOWN IN VIN ONLY IDENTIFIES
KUGA (C394) MODEL,
NOT WHICH ENGINE IS FITTED OR IF THIS ITEM WILL BE CORRECT, PLEASE READ IMPORTANT INFORMATION BELOW)
IMPORTANT INFORMATION - PLEASE READ BEFORE ORDERING
- *** VERY IMPORTANT! THERE IS A CHOICE OF FUEL FILTER ON THIS VEHICLE - PLEASE READ THE FOLLOWING CAREFULLY ***
*** ONLY SUITABLE FOR 1ST GENERATION FORD KUGA 2.0 TDCI MODELS (INC. 4X4) WITH ENGINE CODE: G6DG (MANUFACTURED UP TO ->2010) ***
*** NOT SUITABLE FOR 2.0 TDCI MODELS WITH ENGINE CODES: TXDA / UFDA / UKDA (MANUFACTURED FROM 2010-> ONWARDS - WHICH REQUIRE A DIFFERENT FUEL FILTER) ***
*** IF YOUR KUGA WAS REGISTERED DURING 2010 OR 2011, WE RECOMMEND CONTACTING US BEFORE PURCHASING SO WE CAN CONFIRM THE FUEL FILTER REQUIRED ***
- IF YOU ARE NOT SURE IF THIS ITEM WILL BE CORRECT FOR YOUR VEHICLE, PLEASE CONTACT US BEFORE PURCHASING (BY CLICKING 'Contact seller' NEAR THE TOP OF THIS PAGE) WITH YOUR VEHICLE'S FULL REGISTRATION NUMBER (OR VIN FOR NON-UK VEHICLES)
Item Contents
- ALCO oil filter x 1
- ALCO air filter x 1
- ALCO fuel filter x 1
- Seal for oil sump drain plug x 1
- Millers Oils Trident Professional ECO 5w30 engine oil x 6 litres (5.5L capacity listed by Millers for this vehicle)
The item image contains a picture of the parts that will be supplied in this service kit, which was taken at the time of listing. ALCO occasionally alters the design of their filters, so the filters supplied may look slightly different to the filters shown.
Oil filter
Air filter
Fuel filter
Sump plug seal
Millers Oils engine oil
We Supply the Correct Oil
Trident Professional ECO 5w30 Engine OilDescriptionA professional, fully synthetic, full SAPS engine oil suitable for the latest engine technology. Designed to meet OEM specifications and suitable for use in petrol, diesel and hybrid engines. Millers Oils Trident Professional 5W-30 ECO is recommended for engines requiring a 5w30 viscosity targeting Ford, Jaguar Land Rover and Asian manufacturers.
ApplicationMillers Oils Trident Professional 5W-30 ECO is recommended for engines requiring a 5w30 viscosity targeting Ford, Jaguar Land Rover and Asian manufacturers.
| Performance Profile | | Suitable for:- ACEA A1/B1
- Chrysler MS-6395
- Dacia
- Ford WSS-M2C913-D, Ford WSS-M2C913-C, Ford WSS-M2C913-B
- ILSAC GF-4
- Jaguar Land Rover STJLR.03.5003
- Renault RN0700
- Asian manufacturers
|
Features & Benefits- Excellent low temperature flow when cold starting, helping to instantly protect vital components.
- Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components.
- Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability.
- Millers Oils stop start technology delivers instant protection under hot or cold conditions.
(Specifications correct at time of item listing / latest revision. Although we do our best to display the most up to date information and images, these specifications may be subject to change without notice. Millers Oils may change the design of their bottles and/or labels - if they do, the bottle supplied might look different to the bottle shown in the image above, but the product will be the same.)
Manufacturer's Warranty Not Affected
The parts in this service kit are of at least the same quality as the original manufacturer's parts. Thanks to new EU regulations, even if your vehicle is still under the Manufacturer's Warranty, correct fitment of these parts will
NOT invalidate the warranty.
Block Exemption Regulation (EC) 1400/2002 has been introduced to ensure more competition in the servicing and repairs market, leading to lower costs and higher standards for consumers.
The Block Exemption Regulation means that you have the freedom to choose where to have your vehicle maintained, without the manufacturer's warranty being invalidated, providing original parts, or parts of matching quality are fitted by the garage / repairer.
All ALCO filters sold by us comply with MV-BER N° 461/2010 (Motor Vehicle Block Exception Regulation) and are manufactured within the EU in conformance with the requirements of ISO 9001 - 2008.
We strongly recommend that all parts we supply are fitted by someone qualified to do so. Incorrect fitment of vehicle parts can cause serious damage.
