High quality OE specification ALCO Filter service kit
Vehicle Fitment Guide
Model Details
Make:
FordModel:
Focus Mk3 1.6 TDCiManufacture date:
07/2010-12/2017Model code:
C346Engine Details
Type:
Turbocharged DieselEngine codes:
NGDA / NGDB / T1DA / T1DB / T3DA / T3DBCylinders:
4Capacity:
1560Valves:
8Power:
70kW (95HP) / 77kW (105HP) / 85kW (115HP)Vehicle Identification
VIN code:
BK/BL (from digit 9 of VIN)
VIN example: WF0KXXGC
BKCC00000
(
BK/BL WHERE SHOWN IN VIN ONLY IDENTIFIES
FOCUS MK3 (C346) MODEL,
NOT WHICH ENGINE IS FITTED OR IF THIS ITEM WILL BE CORRECT, PLEASE READ IMPORTANT INFORMATION BELOW)
IMPORTANT INFORMATION - PLEASE READ BEFORE ORDERING
- *** ONLY SUITABLE FOR FORD FOCUS MK3 (C346) 1.6 TDCI MODELS (INC. ECONETIC) ***
- IF YOU ARE NOT SURE IF THIS ITEM WILL BE CORRECT FOR YOUR VEHICLE, PLEASE CONTACT US BEFORE PURCHASING (BY CLICKING 'Contact seller' NEAR THE TOP OF THIS PAGE) WITH YOUR VEHICLE'S FULL REGISTRATION NUMBER (OR VIN FOR NON-UK VEHICLES)
Item Contents
- ALCO oil filter x 1
- ALCO air filter x 1
- ALCO cabin/pollen filter x 1
- Seal for oil sump drain plug x 1
The item image contains a picture of the parts that will be supplied in this service kit, which was taken at the time of listing. ALCO occasionally alters the design of their filters, so the filters supplied may look slightly different to the filters shown.Oil filter
Air filter
Cabin filter
Sump plug seal
Manufacturer's Warranty Not Affected
The parts in this service kit are of at least the same quality as the original manufacturer's parts. Thanks to new EU regulations, even if your vehicle is still under the Manufacturer's Warranty, correct fitment of these parts will
NOT invalidate the warranty.
Block Exemption Regulation (EC) 1400/2002 has been introduced to ensure more competition in the servicing and repairs market, leading to lower costs and higher standards for consumers.
The Block Exemption Regulation means that you have the freedom to choose where to have your vehicle maintained, without the manufacturer's warranty being invalidated, providing original parts, or parts of matching quality are fitted by the garage / repairer.
All ALCO filters sold by us comply with MV-BER N° 461/2010 (Motor Vehicle Block Exception Regulation) and are manufactured within the EU in conformance with the requirements of ISO 9001 - 2008.
We strongly recommend that all parts we supply are fitted by someone qualified to do so. Incorrect fitment of vehicle parts can cause serious damage.