High quality OE specification ALCO Filter service kit with Millers engine oil
Vehicle Fitment Guide
Model Details
Make:
FordModel:
C-Max 1.5 TDCiManufacture date:
03/2015-04/2021Model code:
C344Engine Details
Type:
Turbocharged DieselEngine codes:
AEDA / XWD* / XXDACylinders:
4Capacity:
1499Valves:
8Power:
70kW (95HP) / 77kW (105HP) / 88kW (120HP)IMPORTANT INFORMATION - PLEASE READ BEFORE ORDERING
- *** ONLY SUITABLE FOR 2ND GENERATION FORD C-MAX / GRAND C-MAX 1.5 TDCI MODELS ***
*** THERE IS A CHOICE OF TWO DIFFERENT SUMP PLUG SEALS FOR THIS VEHICLE. BOTH ARE INCLUDED IN THIS ITEM ***
- IF YOU ARE NOT SURE IF THIS ITEM WILL BE CORRECT FOR YOUR VEHICLE, PLEASE CONTACT US BEFORE PURCHASING (BY CLICKING 'Contact seller' NEAR THE TOP OF THIS PAGE) WITH YOUR VEHICLE'S FULL REGISTRATION NUMBER (OR VIN FOR NON-UK VEHICLES)
Item Contents
- ALCO oil filter x 1
- ALCO air filter x 1
- ALCO fuel filter x 1
- ALCO cabin/pollen filter x 1
- Seal for oil sump drain plug x 2
- Millers Oils XF Premium C2 ECO 0w30 engine oil x 5 litres (3.85L capacity listed by Millers for this vehicle)
The item image contains a picture of the parts that will be supplied in this service kit, which was taken at the time of listing. ALCO occasionally alters the design of their filters, so the filters supplied may look slightly different to the filters shown.
Oil filter
Air filter
Fuel filter
Cabin filter
Sump plug seal
Millers Oils engine oil
We Supply the Correct Oil
XF Premium C2 ECO 0w30 Engine OilHigh Performance Fully Synthetic Mid SAPS Engine Oil
Performance Profile- ACEA C2
- Ford M2C950-A
- Jaguar Land Rover STJLR 03.5007
DescriptionXF Premium C2 ECO 0w30 high performance fully synthetic Mid SAPS (Sulphated Ash, Phosphorous & Sulphur) engine oil suitable for the latest engine technology. Designed to meet and offer superior performance to OEM [Original Equipment Manufacturer] specifications. This is achieved by increased cleanliness, engine/oil durability, reduced friction/wear and improved fuel economy.
ApplicationXF Premium C2 ECO 0w30 is recommended for new Diesel engines requiring an SAE 0w30 Ford M2C950-A or Jaguar Land Rover ST JLR 03.5007 specification. XF Long life 0w30 Ford is fully compatible with the latest Diesel Particulate Filters (DPF), Gasoline Particulate Filters (GPF) and Catalytic Converters and is compliant with emissions standards. Please note XF Premium C2 ECO 0w30 is not backwards compatible with older engines.
User Benefits- This synthetic technology produces excellent low temperature flow when cold starting down to -35°C, this yields rapid protection of vital components, as most engine wear occurs during start up.
- XF Premium C2 ECO 0w30 meets Ford/Jaguar Land Rover criteria to offer exceptional viscosity stability at high temperatures and severe operating conditions for maintainable protection and prolonged engine life.
- Increased protection via a stronger oil film between metallic components which in turn reduces friction & wear. The oil will achieve this level of performance throughout the OEM oil change interval.
- Low viscosity offers improved fuel economy & a reduction in emissions due to the optimum levels of detergents and dispersants. These provide high levels of engine cleanliness and sludge control, which improves combustion and helps keep after treatment systems functioning effectively.
- ACEA C2 Mid SAPS specification with a maximum Sulphated Ash content of 0.8%, Sulphur and Phosphorus are chemically an ACEA C3 but with a lower HTHS of minimum 2.9 mPa*s for increased fuel economy.
(Specifications correct at time of item listing / latest revision. Although we do our best to display the most up to date information and images, these specifications may be subject to change without notice. Millers Oils may change the design of their bottles and/or labels - if they do, the bottle supplied might look different to the bottle shown in the image above, but the product will be the same.)
Manufacturer's Warranty Not Affected
The parts in this service kit are of at least the same quality as the original manufacturer's parts. Thanks to new EU regulations, even if your vehicle is still under the Manufacturer's Warranty, correct fitment of these parts will
NOT invalidate the warranty.
Block Exemption Regulation (EC) 1400/2002 has been introduced to ensure more competition in the servicing and repairs market, leading to lower costs and higher standards for consumers.
The Block Exemption Regulation means that you have the freedom to choose where to have your vehicle maintained, without the manufacturer's warranty being invalidated, providing original parts, or parts of matching quality are fitted by the garage / repairer.
All ALCO filters sold by us comply with MV-BER N° 461/2010 (Motor Vehicle Block Exception Regulation) and are manufactured within the EU in conformance with the requirements of ISO 9001 - 2008.
We strongly recommend that all parts we supply are fitted by someone qualified to do so. Incorrect fitment of vehicle parts can cause serious damage.
