Engine service kit containing quality Bosch filters & Millers engine oil
Vehicle Fitment Guide
Model Details
Make:
FordModel:
B-Max 1.5 TDCiManufacture date:
05/2015-04/2021Model code:
B232Engine Details
Type:
Turbocharged DieselEngine codes:
XVJA / XVJCCylinders:
4Capacity(cc):
1499Valves:
8Power:
70kW (95HP)Vehicle Identification
VIN code:
WF0KXXERJK (from digit 1 of VIN)
VIN example:
WF0KXXERJKCE00000
(
WF0KXXERJK WHERE SHOWN IN VIN ONLY IDENTIFIES
FORD B-MAX (B232) MODEL,
NOT THE ENGINE FITTED OR IF THIS ITEM WILL BE CORRECT - PLEASE READ IMPORTANT INFORMATION BELOW)
IMPORTANT INFORMATION - PLEASE READ BEFORE ORDERING
- *** VERY IMPORTANT! THERE IS A CHOICE OF FUEL FILTER AND ENGINE OIL ON THIS VEHICLE! ***
*** ONLY SUITABLE FOR 1ST GENERATION FORD B-MAX 1.5 TDCI MODELS WITH ENGINE CODES: XVJA / XVJC (EURO 6, MADE FROM 2015-> ONWARDS) ***
*** NOT SUITABLE FOR 1.5 TDCI MODELS WITH ENGINE CODE: UGJC (EURO 5, MADE UP TO ->2015) WHICH REQUIRE A DIFFERENT FUEL FILTER AND DIFFERENT ENGINE OIL ***
*** THERE IS A CHOICE OF TWO DIFFERENT SUMP PLUG SEALS FOR THIS VEHICLE. BOTH ARE INCLUDED IN THIS ITEM ***
- IF YOU ARE NOT SURE IF THIS ITEM WILL BE CORRECT FOR YOUR VEHICLE, PLEASE CONTACT US BEFORE PURCHASING WITH YOUR VEHICLE'S FULL REGISTRATION NUMBER (OR FULL VIN FOR NON-UK VEHICLES)
Item Contents
- Bosch oil filter x 1
- Bosch fuel filter x 1
- Seal for oil sump drain plug x 2
- Millers Oils XF Premium C2 ECO 0w30 engine oil x 5 litres (3.85L capacity listed by Millers for this vehicle)
Bosch oil filter
Bosch fuel filter
Sump plug seal
Millers Oils engine oil
(The images contain pictures of the parts that will normally be supplied in this service kit, which were taken at the time of listing. Manufacturers occasionally alter the design of their parts, so the parts supplied may look slightly different to the parts shown.)
We Supply the Correct Oil
XF Premium C2 ECO 0w30 Engine OilHigh Performance Fully Synthetic Mid SAPS Engine Oil
Performance Profile- ACEA C2
- Ford M2C950-A
- Jaguar Land Rover STJLR 03.5007
DescriptionXF Premium C2 ECO 0w30 high performance fully synthetic Mid SAPS (Sulphated Ash, Phosphorous & Sulphur) engine oil suitable for the latest engine technology. Designed to meet and offer superior performance to OEM [Original Equipment Manufacturer] specifications. This is achieved by increased cleanliness, engine/oil durability, reduced friction/wear and improved fuel economy.
ApplicationXF Premium C2 ECO 0w30 is recommended for new Diesel engines requiring an SAE 0w30 Ford M2C950-A or Jaguar Land Rover ST JLR 03.5007 specification. XF Long life 0w30 Ford is fully compatible with the latest Diesel Particulate Filters (DPF), Gasoline Particulate Filters (GPF) and Catalytic Converters and is compliant with emissions standards. Please note XF Premium C2 ECO 0w30 is not backwards compatible with older engines.
User Benefits- This synthetic technology produces excellent low temperature flow when cold starting down to -35°C, this yields rapid protection of vital components, as most engine wear occurs during start up.
- XF Premium C2 ECO 0w30 meets Ford/Jaguar Land Rover criteria to offer exceptional viscosity stability at high temperatures and severe operating conditions for maintainable protection and prolonged engine life.
- Increased protection via a stronger oil film between metallic components which in turn reduces friction & wear. The oil will achieve this level of performance throughout the OEM oil change interval.
- Low viscosity offers improved fuel economy & a reduction in emissions due to the optimum levels of detergents and dispersants. These provide high levels of engine cleanliness and sludge control, which improves combustion and helps keep after treatment systems functioning effectively.
- ACEA C2 Mid SAPS specification with a maximum Sulphated Ash content of 0.8%, Sulphur and Phosphorus are chemically an ACEA C3 but with a lower HTHS of minimum 2.9 mPa*s for increased fuel economy.
(Specifications correct at time of item listing / latest revision. Although we do our best to display the most up to date information and images, these specifications may be subject to change without notice. Millers Oils may change the design of their bottles and/or labels - if they do, the bottle supplied might look different to the bottle shown in the image above, but the product will be the same.)
Quality Parts
Bosch filters are made to meet or exceed vehicle manufacturer specifications and are 100% BER compliant, so you can be confident they meet the high standards required for today's cars.
We strongly recommend that all parts we supply are fitted by someone qualified to do so. Incorrect fitment of vehicle parts can cause serious damage.
