High quality OE specification ALCO Filter service kit
Vehicle Fitment Guide
Model Details
Make:
CitroenModel:
C5 2.0 BlueHDiManufacture date:
03/2015-11/2017Model code:
X7 (2nd Gen)Engine Details
Type:
Turbocharged DieselEngine codes:
AHR (DW10FD) / AHW (DW10FC)Cylinders:
4Capacity:
1997Valves:
16Power:
110KW 150HP / 133KW 181HPVehicle Identification
VIN code:
VF7 + RD/RW + AHR / AHW (from digit 1 of VIN)
VIN example:
VF7RWAHRMFL000000
(
VF7 + RD/RW + AHR / AHW WHERE SHOWN IDENTIFIES
CITROEN C5 [X7 (2ND GEN)] MODEL WITH
AHR (DW10FD) / AHW (DW10FC) 2.0 BLUEHDI ENGINE)
IMPORTANT INFORMATION - PLEASE READ BEFORE ORDERING
- *** VERY IMPORTANT! THERE ARE CHOICES FOR THIS VEHICLE DEPENDING ON THE ENGINE CODE! PLEASE READ THE FOLLOWING CAREFULLY BEFORE ORDERING! ***
*** THIS ITEM WILL ONLY BE SUITABLE FOR 2ND GENERATION CITROEN C5 2.0 BLUEHDI MODELS WITH ENGINE CODES: AHR (DW10FD) / AHW (DW10FC) ***
*** THIS ITEM WILL NOT BE SUITABLE FOR 2.0 HDI MODELS WITH ENGINE CODES: RHE (DW10CTED4) / RHH (DW10CTED4) / RHF (DW10BTED4) / RHR (DW10BTED4) WHICH WILL REQUIRE DIFFERENT FILTERS ***
- IF YOU ARE NOT SURE IF THIS ITEM WILL BE CORRECT FOR YOUR VEHICLE, PLEASE CONTACT US BEFORE PURCHASING (BY CLICKING ON 'ASK A QUESTION' NEAR THE BOTTOM OF THIS PAGE) WITH YOUR VEHICLE'S FULL REGISTRATION NUMBER (OR FULL VIN FOR NON-UK VEHICLES)
Item Contents
- ALCO oil filter x 1
- ALCO fuel filter x 1
- Oil sump drain plug with seal x 1
The item image contains a picture of the parts that will be supplied in this service kit, which was taken at the time of listing. ALCO occasionally alters the design of their filters, so the filters supplied may look slightly different to the filters shown.
Oil filter
Fuel filter
Sump plug
Manufacturer's Warranty Not Affected
The parts in this service kit are of at least the same quality as the original manufacturer's parts. Thanks to new EU regulations, even if your vehicle is still under the Manufacturer's Warranty, correct fitment of these parts will
NOT invalidate the warranty.
Block Exemption Regulation (EC) 1400/2002 has been introduced to ensure more competition in the servicing and repairs market, leading to lower costs and higher standards for consumers.
The Block Exemption Regulation means that you have the freedom to choose where to have your vehicle maintained, without the manufacturer's warranty being invalidated, providing original parts, or parts of matching quality are fitted by the garage / repairer.
All ALCO filters sold by us comply with MV-BER N° 461/2010 (Motor Vehicle Block Exception Regulation) and are manufactured within the EU in conformance with the requirements of ISO 9001 - 2008.
We strongly recommend that all parts we supply are fitted by someone qualified to do so. Incorrect fitment of vehicle parts can cause serious damage.
