Engine service kit containing quality Bosch filters & NGK spark plugs
Vehicle Fitment Guide
Model Details
Make:
AudiModel:
S3 2.0 TFSiManufacture date:
11/2006-03/2013Model code:
8PEngine Details
Type:
Turbocharged PetrolEngine codes:
BHZ / BZC / CDLA / CDLCCylinders:
4Capacity(cc):
1984Valves:
16Power:
188kW (256HP) / 195kW (265HP)Vehicle Identification
VIN code:
8P (from digit 7 of VIN)
VIN example: WAUZZZ
8P36A000000
(
8P WHERE SHOWN IN VIN ONLY IDENTIFIES
AUDI S3 (8P) MODEL,
NOT THE ENGINE FITTED OR IF THIS ITEM WILL BE CORRECT - PLEASE READ IMPORTANT INFORMATION BELOW)
IMPORTANT INFORMATION - PLEASE READ BEFORE ORDERING
- *** ONLY SUITABLE FOR 2ND GENERATION AUDI A3 S3 2.0 TFSI TURBO PETROL MODELS ***
*** NOT SUITABLE FOR 1ST OR 3RD GENERATION MODELS ***
*** ONLY SUITABLE FOR RIGHT HAND DRIVE VEHICLES. NOT SUITABLE FOR LEFT HAND DRIVE VEHICLES WHICH REQUIRE A DIFFERENT CABIN FILTER *** - IF YOU ARE NOT SURE IF THIS ITEM WILL BE CORRECT FOR YOUR VEHICLE, PLEASE CONTACT US BEFORE PURCHASING WITH YOUR VEHICLE'S FULL REGISTRATION NUMBER (OR FULL VIN FOR NON-UK VEHICLES)
- *** THIS SERVICE KIT WILL ONLY BE SUITABLE FOR VEHICLES RUNNING PETROL ONLY. NOT FOR LPG / DUAL FUEL VEHICLES WHICH REQUIRE DIFFERENT SPARK PLUGS ***
Item Contents
- Bosch oil filter x 1
- Bosch air filter x 1
- Bosch fuel filter x 1
- Bosch charcoal cabin/pollen filter x 1
- NGK laser platinum spark plug x 4
- Oil sump drain plug with seal x 1
Bosch oil filter
Bosch air filter
Bosch fuel filter
Bosch cabin filter
NGK spark plugs
Sump plug
(The images contain pictures of the parts that will normally be supplied in this service kit, which were taken at the time of listing. Manufacturers occasionally alter the design of their parts, so the parts supplied may look slightly different to the parts shown.)
Manufacturer's Warranty Not Affected
The parts in this service kit are of at least the same quality as the original manufacturer's parts. Thanks to new EU regulations, even if your vehicle is still under the Manufacturer's Warranty, correct fitment of these parts will
NOT invalidate the warranty.
Block Exemption Regulation (EC) 1400/2002 has been introduced to ensure more competition in the servicing and repairs market, leading to lower costs and higher standards for consumers.
The Block Exemption Regulation means that you have the freedom to choose where to have your vehicle maintained, without the manufacturer's warranty being invalidated, providing original parts, or parts of matching quality are fitted by the garage / repairer.
We strongly recommend that all parts we supply are fitted by someone qualified to do so. Incorrect fitment of vehicle parts can cause serious damage and/or injury.