High quality OE specification ALCO Filter service kit
Vehicle Fitment Guide
Model Details
Make:
AudiModel:
A3 2.0 TDi 8VManufacture date:
03/2003-05/2006Model code:
8PEngine Details
Type:
Turbocharged DieselEngine code:
BMMCylinders:
4Capacity:
1968Valves:
8Power:
103kW (140HP)Vehicle Identification
VIN code:
8P (from digit 7 of VIN)
VIN example: WAUZZZ
8PX6A100000
(
8P WHERE SHOWN IN VIN ONLY IDENTIFIES
AUDI A3 (8P) MODEL,
NOT THE ENGINE FITTED OR IF THIS ITEM WILL BE CORRECT - PLEASE READ IMPORTANT INFORMATION BELOW)
IMPORTANT INFORMATION - PLEASE READ BEFORE ORDERING
- *** VERY IMPORTANT! - THERE IS A CHOICE OF FUEL FILTER ON THIS MODEL ***
*** PLEASE CHECK THE FOLLOWING 3 THINGS BEFORE ORDERING:
1) YOUR VEHICLE'S ENGINE CODE MATCHES ONE OF THE ENGINE CODES LISTED ABOVE
2) YOUR VEHICLE'S VIN IS UP TO ->WAUZZZ8P-6-176000 (DASHES REPRESENT CHARACTERS THAT CAN BE IGNORED)
3) THE FUEL FILTER HOUSING IS MARKED 1K0 127 400 K (FUEL FILTER HEIGHT = 116MM)
THIS ITEM WILL NOT BE SUITABLE IF THE FUEL FILTER HOUSING IS MARKED WITH ONE OF THE FOLLOWING NUMBERS (AS A DIFFERENT FUEL FILTER WILL BE REQUIRED):
1K0 127 400 B
1K0 127 400 C
1K0 127 400 E
1K0 127 400 J
3C0 127 400 C - IF YOU ARE NOT SURE IF THIS ITEM WILL BE CORRECT FOR YOUR VEHICLE, PLEASE CONTACT US BEFORE PURCHASING (BY CLICKING ON 'ASK A QUESTION' NEAR THE BOTTOM OF THIS PAGE) WITH YOUR VEHICLE'S FULL REGISTRATION NUMBER (OR FULL VIN AND ENGINE CODE FOR NON-UK VEHICLES) AND THE PART NUMBER FROM THE FUEL FILTER HOUSING
Item Contents
- ALCO oil filter x 1
- ALCO air filter x 1
- ALCO fuel filter x 1
- ALCO cabin/pollen filter x 1
- Oil sump drain plug with seal x 1
The item image contains a picture of the parts that will be supplied in this service kit, which was taken at the time of listing. ALCO occasionally alters the design of their filters, so the filters supplied may look slightly different to the filters shown.
Oil filter
Air filter
Fuel filter
Cabin filter
Sump plug
Manufacturer's Warranty Not Affected
The parts in this service kit are of at least the same quality as the original manufacturer's parts. Thanks to new EU regulations, even if your vehicle is still under the Manufacturer's Warranty, correct fitment of these parts will
NOT invalidate the warranty.
Block Exemption Regulation (EC) 1400/2002 has been introduced to ensure more competition in the servicing and repairs market, leading to lower costs and higher standards for consumers.
The Block Exemption Regulation means that you have the freedom to choose where to have your vehicle maintained, without the manufacturer's warranty being invalidated, providing original parts, or parts of matching quality are fitted by the garage / repairer.
All ALCO filters sold by us comply with MV-BER N° 461/2010 (Motor Vehicle Block Exception Regulation) and are manufactured within the EU in conformance with the requirements of ISO 9001 - 2008.
We strongly recommend that all parts we supply are fitted by someone qualified to do so. Incorrect fitment of vehicle parts can cause serious damage.
